| Professional Shrink Wrapping Systems 18" wide Economy - SWK-18-S4 only $199.00 Special A complete standard shrink wrapping system to professionally package any product. All systems consist of a 500 ft, 75 gauge, centerfold film to wrap the product. The steel constructed I-bar sealer has a film roller caddy, film separator, a heat gun holder (which points the heat gun up so that the hot heat gun can cool in the optimum position to expel the heat). The sealer includes a round wire element to cut & seal the CF PVCshrink film. A standard heat gun HG-1 and a power strip complete the standard shrink wrap kit. Shrink wrapping is useful to package parts, repack returns, and pack CDs, cassettes, videos, DVDs, books, and various other items. Quickly create a sealed, custom-sized shrink wrapping that improves the appearance and at the same time, keeps the product clean, moisture-free, & tamper-proof. |
| Saveonsealers.com AIE - TISH - FS - Weston - WN Series - Shrink System Parts Your Source For Sealer Parts - Impulse Hand Sealer Parts - Foot sealer Parts - Automatic Sealer Parts Vacuum Sealer Parts - Amerivacs - Promarks - 1000's of Parts in Stock Ph 760-522-8734 FAX 760-888-2000 Shrink Wrap Equipment & Shrink wrap rolls - Shrink bags for CD's - Dome Shrink Bags in stock -Ziplok recloseable bags |
Easy to operate:
1). Turn on the power source.
2). Set the timer to the lowest setting that will cut through the shrink film.
3). Make sure that one layer of film is under the film separator & one layer of film is over the film separator. Pull enough
of the CF shrink film to the sealing surface and cut and seal the start of your new roll of shrink film. Now pull enough of
your film past the sealing bar to accommodate the item that is to be packaged. Insert the item between the 2 layers of
centerfold shrink film and press down the sealing bar. As soon as you are able to pull your item away from the seal bar,
the cut and seal is complete. Now turn your product a quarter turn so that your other unsealed edge can be sealed.
Now bring down the sealing bar and again as soon as you are able to pull away your item from the sealing bar, the seal
is complete.
4). Apply hot air to the shrink-packaged item using a heat gun to shrink the film uniformly.
1). Turn on the power source.
2). Set the timer to the lowest setting that will cut through the shrink film.
3). Make sure that one layer of film is under the film separator & one layer of film is over the film separator. Pull enough
of the CF shrink film to the sealing surface and cut and seal the start of your new roll of shrink film. Now pull enough of
your film past the sealing bar to accommodate the item that is to be packaged. Insert the item between the 2 layers of
centerfold shrink film and press down the sealing bar. As soon as you are able to pull your item away from the seal bar,
the cut and seal is complete. Now turn your product a quarter turn so that your other unsealed edge can be sealed.
Now bring down the sealing bar and again as soon as you are able to pull away your item from the sealing bar, the seal
is complete.
4). Apply hot air to the shrink-packaged item using a heat gun to shrink the film uniformly.
1
2
3
4
Shrink Rolls and Shrink Bags many sizes in stock CLICK HERE
| REPAIR KIT For This Unit is the Part # RK-18B(SP) Included wire element & Teflon $19.50 per Kit. |
| IN STOCK ORDER NOW Save $30.00 NOW $199.00 Complete |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| CLICK ON PICTURES FOR LARGER IMAGE |
Regular $229.00 BUY NOW AT $199.00
Inquiries - Email sealers.1000@yahoo.com